Preorder

Programmable Electric Kiln 1500W Max 1200°C with TY-18 Control

SKU: PPK00024

$1,489.99

$1,189.99

Controller
TY-18 programmable ramp / soak temperature controller
Programming
Alternating temperature setpoints and timed segments
Maximum temperature
1200 C / 2192 F
View all specifications
Preorder now and save $300.Estimated arrival: 2026.11.29-2026.12.13.

Built for the job.

The compact Small Electric Kiln upgraded with a TY-18 programmable controller for staged ramp and soak firing profiles. It keeps the same 1200 C chamber, 1500W heating system and desktop footprint as the standard model.

TY-18 programmable controller lets you enter a sequence of temperature setpoints and segment times for repeatable ramp and soak firing profiles.

Up to 1200 C / 2192 F maximum temperature supports compatible metal clay, pottery glazing, wax casting, annealing and jewellery work.

1500W heating system reaches maximum temperature in approximately 34-38 minutes under suitable conditions.

Four-side surrounding heat design helps keep the chamber temperature more even for consistent small-batch results.

Compact 20 x 15 x 15cm chamber suits home studios, jewellery benches, pottery spaces and small creative production.

Download the PROPICK TY-18 guide before use and verify every programmed temperature, hold time and final stop command before firing.

Technical specifications

Final accessories, availability and shipping are confirmed before dispatch.

Product typeDesktop high-temperature electric kiln / furnace
ControllerTY-18 programmable ramp / soak temperature controller
ProgrammingAlternating temperature setpoints and timed segments
Maximum temperature1200 C / 2192 F
Power1500W
Heat-up timeApprox. 34-38 minutes to maximum temperature
External size55 x 33 x 31.8cm
Chamber size20 x 15 x 15cm
Heating styleFour-side surrounding heating
ApplicationsJewellery, pottery glazing, metal clay, wax casting and small studio work
ShippingCalculated from delivery address at checkout

Guides & manuals

Use the video walkthroughs here or open the downloadable PDF manuals.

What's included

  • TY-18 programmable electric kiln body
  • Power cord
  • Heat-resistant gloves
  • Crucible tongs
  • PROPICK TY-18 controller user manual

Warranty & support

12-month warranty support pathway on eligible products. Freight, misuse, consumables, installation errors and normal wear are excluded unless required by New Zealand law.

FAQ

How is this model different from the Small Electric Kiln?

The kiln body, 1200 C maximum temperature, 1500W heating system and chamber dimensions are the same. This version adds the TY-18 programmable controller for staged temperature and time segments.

What electrical supply does this kiln require in New Zealand?

The kiln is rated at 1500W, but the supplied voltage, plug, current and circuit requirements must be confirmed before dispatch. Do not use a travel adaptor or unsuitable extension lead; ask a licensed electrical worker if the installation or circuit is uncertain.

Can it fire every type of pottery clay?

No. Its listed maximum is 1200 C, so the clay body, glaze and firing schedule must all be compatible with that limit and the chamber size. Check the material supplier's firing instructions before loading the kiln.

Is the stated heat-up time the same as a full firing cycle?

No. The approximate 34-38 minute heat-up figure describes heating under test conditions, not a complete ceramic firing. A programmed firing may include controlled ramps, holds and a long natural cool-down.

Where should I operate the kiln?

Use a dedicated, dry, well-ventilated workspace on a stable non-combustible surface with the clearances stated in the manual. Keep people, pets and flammable materials away, and never leave an unsafe or unverified firing setup unattended.

How much work fits inside?

The chamber is approximately 20 x 15 x 15cm. Allow space around pieces and heating surfaces rather than filling the entire volume.