The 220V, 2.2kW motor drives a single shaft to work clay through the barrel and out through the 75mm opening.
Clay Pugmill 2.2kW Single-Shaft Non-Vacuum Studio Preparation
SKU: PPK00034
$1,999.99
4 fortnightly payments of $500.00 with![]()
- Rated motor power
- 2.2kW
- Shaft configuration
- Single shaft
- De-airing system
- Non-vacuum
Built for the job.
A powered single-shaft pugmill for preparing and extruding workable clay in a pottery studio. The stainless-steel interior and 75mm outlet suit a dedicated clay-preparation area. This is a non-vacuum model, so it does not provide vacuum de-airing.
Stainless-steel internal surfaces are specified for the clay-contact area.
The non-vacuum design prepares and extrudes clay without a vacuum chamber; further wedging or de-airing may be needed for the intended work.
The floor-standing frame shown in the product images has castors for positioning within the studio. Set it securely before operation.
The machine measures approximately 114 x 39.5 x 60cm (L x W x H) and weighs around 60kg. Plan suitable lifting equipment, access and a stable final position.
Use clean, suitably soft clay and keep hands, tools and loose clothing away from the feed opening and moving parts. Isolate the power before cleaning or clearing a blockage.
Technical specifications
Final accessories, availability and shipping are confirmed before dispatch.
What's included
- Single-shaft non-vacuum pugmill with 2.2kW motor and 75mm outlet
Warranty & support
12-month warranty support pathway on eligible products. Freight, misuse, consumables, installation errors and normal wear are excluded unless required by New Zealand law.
FAQ
Does this pugmill remove air from clay?
It is a non-vacuum model and does not provide vacuum de-airing. Depending on the clay and intended process, additional wedging or a separate de-airing stage may be required before throwing or other work.
What size clay column does it produce?
The listed outlet diameter is 75mm. This describes the outlet size rather than an hourly production rate. Prepare clay to a suitable working consistency and use the operating instructions to assess whether the output suits your studio process.
What should I prepare for installation and moving?
Allow for a machine approximately 114 x 39.5 x 60cm (L x W x H) and around 60kg. Arrange suitable handling and a secure studio position. The electrical rating is 220V, 2.2kW; confirm the supplied phase, plug and circuit requirements before connection.
How do I clean it when changing clay?
Disconnect and isolate the power before accessing clay-contact parts. Remove old clay using the supplied cleaning procedure so it does not contaminate the next clay body. Keep water away from the motor, controls and electrical connections; no waterproof electrical rating is claimed.
How do I keep clear of the moving shaft?
Keep hands, loose clothing and tools out of the hopper and outlet while the machine is connected or running. Do not force hard, dry or fired material into it. Isolate the power before clearing a blockage, cleaning or making adjustments, and follow the supplied operating instructions.



