The approximately 600 x 435mm bed gives more room for paper and plates than the smaller handwheel model.
Etching Press 600 x 435mm Bed with 15:1 Reduction Gearing
SKU: PPK00036
$1,189.99
4 fortnightly payments of $297.50 with![]()
- Printing bed
- 600 x 435mm (L x W)
- Drive
- Manual geared handwheel
- Reduction ratio
- 15:1; approximately 15 handwheel turns per roller revolution
Built for the job.
A larger tabletop press for printmakers who need more bed width and a geared handwheel drive. The 600 x 435mm bed supports relief and intaglio projects, while the 15:1 reduction trades more handwheel turns for easier controlled movement through the rollers.
A 15:1 reduction drive means approximately 15 handwheel turns for one roller revolution, reducing the effort needed to move a correctly set printing stack.
The metal upper roller is approximately 114mm in diameter, with an 89mm lower roller.
Screw adjustment on both sides sets the upper roller height and pressure for the plate, paper and packing.
Manual operation requires no electrical supply and suits relief or intaglio techniques with the appropriate materials and pressure settings.
The listed machine size is approximately 60 x 62 x 40cm. Plan a rigid bench, full bed travel and suitable handling for the approximately 47kg package.
Technical specifications
Final accessories, availability and shipping are confirmed before dispatch.
What's included
- 600mm tabletop etching press with reduction gearbox, handwheel and printing bed
Warranty & support
12-month warranty support pathway on eligible products. Freight, misuse, consumables, installation errors and normal wear are excluded unless required by New Zealand law.
FAQ
What is different from the 500mm handwheel press?
This model has a 600 x 435mm bed, a larger 114mm upper roller and a 15:1 reduction drive. The smaller model has a 500 x 315mm bed and direct handwheel operation. Choose according to the paper and plate size, available bench space and preferred drive.
Does the geared drive use an electric motor?
No. It is manually operated. The gearbox reduces the movement at the roller: approximately 15 handwheel turns produce one roller revolution. It changes the effort and speed of operation without needing an electrical supply.
Is 600mm the printable width?
No. The listed bed is 600mm long by 435mm wide. Check the paper, plate and packing together against the usable bed and roller clearance, especially when the planned print is close to the machine's limits.
Can I use it for both relief and intaglio work?
Yes, the adjustable upper roller is intended for techniques such as linocut, woodcut, drypoint and etched plates. Use the correct packing and materials for each process, set both sides evenly and make a test print before running finished work.
What should I prepare before delivery?
Allow for a listed 65 x 65 x 54cm package weighing approximately 47kg. Arrange suitable handling and a strong, level bench, with clear space for full bed travel and handwheel access. Printing consumables and process-specific blankets or packing are not listed as included.



