The printing bed measures approximately 500 x 315mm. Check plate, paper and packing dimensions against the usable bed before choosing the press.
Etching Press 500 x 315mm Bed with Manual Handwheel Drive
SKU: PPK00035
$689.99
Save $1104 fortnightly payments of $172.50 with![]()
- Printing bed
- 500 x 315mm (L x W)
- Drive
- Manual handwheel
- Upper roller diameter
- 89mm
Built for the job.
A compact handwheel press for relief and intaglio printmaking in a home or teaching studio. The 500 x 315mm bed and adjustable upper roller provide a practical starting point for linocut, drypoint and etched-plate work, with the packing and pressure set for each process.
Upper and lower metal rollers are both approximately 89mm in diameter.
Screw adjustments on both sides set the upper roller height and printing pressure for the chosen plate and packing.
The handwheel moves the bed manually, with no electricity required.
Suitable techniques include linocut, woodcut, drypoint, etched copper, acrylic plates and other relief or intaglio work with an appropriate setup.
The listed machine dimensions are approximately 50 x 52 x 40cm. Allow additional bench space for the bed to travel fully in both directions.
Technical specifications
Final accessories, availability and shipping are confirmed before dispatch.
What's included
- 500mm tabletop etching press with handwheel and printing bed
Warranty & support
12-month warranty support pathway on eligible products. Freight, misuse, consumables, installation errors and normal wear are excluded unless required by New Zealand law.
FAQ
Is 500mm the printable width?
No. The listed bed is 500mm long by 315mm wide. Allow room for the plate, paper and required packing, and confirm the usable working area if your project is close to the bed limits.
Can it print both linocuts and etched copper plates?
It is intended for relief and intaglio techniques, including linocut, drypoint and etched copper. Each process needs suitable plates, inks, paper and packing; adjust the roller height and pressure for the specific printing stack.
How do I set the pressure evenly?
Adjust both sides of the upper roller evenly and begin with light pressure on a test print. Increase only as needed for the plate and packing. Do not force an oversized stack through the rollers or use extra leverage on the handwheel.
Does the handwheel press need electricity?
No. It is manually operated from the handwheel and does not require an electrical supply. This listing includes the press and printing bed; inks, paper, plates and process-specific blankets or packing are not listed as included.
What bench space should I allow?
The machine is approximately 50 x 52 x 40cm, but that is not the full operating envelope. Use a strong, level bench and leave clear space at both ends for the entire bed movement, as well as handwheel access.



